Power Monitor Module For cube orange

Product Details

• Model: Power Monitor Module - 200A Hall Induction - UBECCompatibility: APM / PIXHAWK / PIXraptor / PX4 series - GHs Lock PortDesign: Separation design - Main module + Hall sensor - Hall sensor non-contact induction - Built-in digital processing circuit & referenceUBEC Main Module:Input Voltage: 2S-12S LiPo - Max 60VOutput Voltage: 5.3V / 3APartial Pressure Detection: 15.7 - Voltage detectionDimension: 25_51_10mmWeight: 15gNote: Max input 60V but detection voltage only about 51.8V on 3.3V ADC system - 12S Lithium BatteryHall Sensor:Power Supply Voltage: 5V ±0.3Detection Ratio: 60.61A/VDetection Reference: 0.825V / 50ADimension: 22_26_8.5mmThreading Hole Diameter: 10mmInstallation Hole Distance: 17mmWeight: 11gRequires 5V regulated power supply otherwise accuracy affectedCalibration Instructions:Static Calibration: Return output signal to zero when input current is 0 - Must do before ratio calibrationRatio Calibration: Set output signal at 0.825V under standard 50A current - Fix ratio as 50/0.825 = 60.61A/VCalibration Conditions: Standard 5V power - Standard 50A current source - Can be formed 5A wound 9 times = 10x current
• 10A wound 4 times
• 25A 1 circle - More turns greater cumulative error - Use 25 or 50A source as far as possible - Connect calib pin to ground with switch - Press switch twice when current 0